Available 
Geeetech Tri Color Silk PLA Filament , 3D Filament 1,75 mm 1KG Spool Wire (+/-0.03mm) Vacuum packaging, special color
from £9.29.
£9.29
Options tracked: Red Black Gold, Purple Gold Black, Blue Purple Black, Red Blue Green
GEEETECH 3D printer filament
GEEETECH Luminous PLA Filament for 3D Printer 1.75mm 1kg Glow in the Dark Plastic PLA 3D Printing Materials review
GEEETECH’s glow-in-the-dark 1.75mm 1kg PLA is worth a look if you want a luminous filament rather than the cheapest everyday spool, but live price, stock and delivery still matter.
ReviewsShop may earn a commission if you buy through links on this site.
Last verified: 2026-06-17
Quick verdict
GEEETECH Luminous PLA Filament for 3D Printer 1.75mm 1kg Glow in the Dark Plastic PLA 3D Printing Materials is a sensible shortlist pick if your project genuinely needs glow-in-the-dark PLA. At £11.09-£13.29, it is not the cheapest filament in the wider market, so the value case depends on whether the luminous finish and GEEETECH brand fit your build. Before ordering, check the exact option, live UK delivery cost and current stock on AliExpress.
Available options and prices
GEEETECH Luminous PLA Filament for 3D Printer 1.75mm 1kg Glow in the Dark Plastic PLA 3D Printing Materials is listed with 3 options from £9.79-£11.79. The visible options include YELLOW, Orange, so use the table to compare the option that matches the exact size, colour, format or specification you want. Always confirm the final checkout price, delivery charge and stock status on the retailer page.
Key product details
These are the retailer details worth checking first for GEEETECH Luminous PLA Filament for 3D Printer 1.75mm 1kg Glow in the Dark Plastic PLA 3D Printing Materials: Brand: GEEETECH; Type: 3D printer filament; Key spec: PLA; Options tracked: YELLOW, Orange. Treat them as a quick fact sheet, then use the retailer page to verify any installation, warranty, delivery or model-number details before buying.
| Brand | GEEETECH |
|---|---|
| Type | 3D printer filament |
| Key spec | PLA |
| Options tracked | YELLOW, Orange |
| Price range | £9.79-£11.79 |
| Owner rating signal | Not enough owner-review data yet |
| Last checked | 2026-06-17 |
What the product page confirms
The listing identifies this as a GEEETECH 3D printer filament in PLA, with the title also specifying 1.75mm and 1kg. Tracked options include Orange and YELLOW, so the colour you click through matters as much as the headline name. The current product information does not show meaningful owner-review volume, so it is better to rely on the listing details and the live checkout page than on a rating badge.
What stands out in the wider comparison
Compared with similar 3D printer filament listings, this spool starts at £11.09, which is above the comparable median of £6.09. In the peer set, 523 options start lower and 267 start higher, so it is not a low-end price play. The listing also has 3 tracked variants, which is more choice than the median of 1. That extra flexibility is useful, but only if the selected option matches your printer and project.
Trade-offs to compare before buying
The main trade-off here is simple: you are paying for glow-in-the-dark PLA and a GEEETECH-branded spool, not chasing the cheapest everyday filament. For example, this GEEETECH listing starts at £11.09, while the comparable filament median is £6.09, so a standard PLA alternative may be better value if you do not need the luminous effect. If your print needs a different working feel, PETG or TPU would be a separate choice entirely. For UK buyers, the real decision is whether the glow feature is worth the final delivered price once postage is added, not just the displayed listing price.
Price and value benchmark
The displayed price range of £11.09-£13.29 sits above the comparable-product median of £6.09 across 792 similar 3D printer filament products. In that set, 523 options start lower and 267 start higher, so this is not a bargain-basement buy by category standards. The glow effect may still justify the spend for the right project, but final value depends on UK delivery cost, stock, and whether you actually need luminous PLA rather than standard PLA.
Specs versus alternatives
The key compatibility check is still the familiar one: make sure your printer wants 1.75mm filament and that a 1kg PLA spool is the format you need. If you only want a plain everyday material, a standard PLA alternative may be better value; if you need a different working feel, PETG or TPU would be a separate choice entirely. This GEEETECH listing is more about the luminous effect and brand familiarity than about being the lowest-cost generic PLA.
How to read the review evidence
The supplied product data shows rating_average 0 and review_count_max 0, so there is no strong owner review details to lean on here. That matters because the listing’s value depends more on the exact 1.75mm, 1kg, glow-in-the-dark PLA specification than on social proof. External brand context for Geeetech is mixed overall, which is another reason to verify the current AliExpress page closely.
Who it suits
This listing suits shoppers who specifically want glow-in-the-dark PLA for maker projects, display pieces or novelty prints and are comfortable weighing a mid-price spool against some uncertainty. It also makes sense if you already know GEEETECH filament and are comparing it with other PLA options rather than shopping only on price. UK buyers who care more about the luminous finish than about finding the absolute cheapest spool are the most likely to get value here, especially if the 1.75mm 1kg format matches their printer.
Who should avoid it
Skip this if you need the cheapest usable filament, because the GEEETECH spool starts at £11.09 and sits above the comparable-product median of £6.09. It is also a weak fit if you want strong customer-review evidence before buying, since this AliExpress listing shows rating_average 0 and review_count_max 0. If you are unsure about glow-in-the-dark PLA at all, a standard PLA option is the safer comparison point and may suit the same printer more cheaply.
Comfort checks before checkout
Before paying for GEEETECH Luminous PLA Filament for 3D Printer 1.75mm 1kg Glow in the Dark Plastic PLA 3D Printing Materials, confirm that the chosen checkout option really is the colour you want, because Orange and YELLOW are both tracked and the title alone does not remove that risk. Check the final delivered price to the UK, the postage estimate and whether the item is in stock for the variant you want. It would also be sensible to look for any packaging or moisture-control details on the live page, without assuming those details are included just because it is PLA.
Value check
This is a decent value only if you want glow-in-the-dark PLA specifically and the final UK delivered price still feels reasonable after postage. It is not the lowest category price, so compare it with nearby standard PLA alternatives before you decide. For shoppers who just need a normal 1.75mm 1kg spool, the extra cost may be hard to justify; for maker projects that benefit from the luminous finish, the premium is easier to defend. Just remember that the displayed AliExpress price is not the final UK delivered cost once postage is added.
Good alternatives to compare
The closest alternatives to compare with GEEETECH Luminous PLA Filament for 3D Printer 1.75mm 1kg Glow in the Dark Plastic PLA 3D Printing Materials include Geeetech Tri Color Silk PLA Filament , 3D Filament 1,75 mm 1KG Spool Wire (+/-0.03mm) Vacuum packaging, special color, Geeetech Matte Filament PLA 1.75mm 1kg Spool (2.2lbs), 3d printer Material polylactic acid, frosted texture, Vacuum packaging, Geeetech 3d printer Filament PLA PETG Plastic 1kg 1.75mm,Tangle-Free, 3d printing wire materials, , , vacuum packaging. Use these cards to check whether a nearby model gives you a better price, a more suitable specification or a clearer match for your space and budget.
Available 
Geeetech Matte Filament PLA 1.75mm 1kg Spool (2.2lbs), 3d printer Material polylactic acid, frosted texture, Vacuum packaging
from £8.39.
£8.39
Options tracked: Matte Black
Available 
Geeetech 3d printer Filament PLA PETG Plastic 1kg 1.75mm,Tangle-Free, 3d printing wire materials, , , vacuum packaging
from £7.55-£8.39.
£7.55-£8.39
Options tracked: PETG White, PLA Black, PLA Yellow
Retailer details used
Last checked 2026-06-17. The source list below is included to help you check the details behind the comparison. Always confirm the latest price, delivery cost, stock status and product details with the retailer before buying.
More products to compare
These related guides and reviews can help you compare nearby options before buying.
Questions about this product
Is GEEETECH Luminous PLA Filament worth considering if I specifically want glow-in-the-dark PLA?
Yes, it is worth shortlisting if the glow-in-the-dark effect is the main reason you are buying. The key is to compare the live price, chosen colour option and delivery cost, because the listing is not a cheapest-in-category pick.
Is the listed price good value compared with other 3D printer filaments?
At £11.09-£13.29, it sits above the comparable median of £6.09, so it is priced more like a feature-led buy than a generic budget spool. Value depends on whether the luminous finish and GEEETECH brand matter to your project.
Which option should I choose at checkout, and why does colour matter here?
Choose the option that matches the colour you actually want, because Orange and YELLOW are both tracked. The title confirms the filament type and size, but the checkout option still decides which colour variant you receive.
Can I rely on reviews for this listing?
Not really. The supplied product information shows no meaningful owner-review volume, so shoppers should lean more on the exact title, the selected option, delivery cost and compatibility details before ordering.
Should I choose this over standard PLA or a different filament type?
Choose it if you want glow-in-the-dark PLA specifically. If you only need everyday printing, standard PLA may be better value; if you need different material behaviour, PETG or TPU would be the more relevant alternatives.