Available 
Creality Official Ender 3 V3 SE/KE Filament Runout Sensor Kit, Detection Module Detector with LED Light for V3 KE/V3 SE 3D Print
from £9.99.
£9.99
Options tracked: Filament Detector
Creality 3D printer filament
Creality Clog Poke 3D Printer Nozzle Cleaning Kit for 1.75mm Filament Nozzles Φ1.5mm L210mm Needle Clean Hotend 3d Printer Part review
Creality Clog Poke is a niche nozzle-cleaning accessory for 1.75mm filament hotends, and the main question is whether the 1.5mm x 210mm spec matches your printer.
ReviewsShop may earn a commission if you buy through links on this site.
Last verified: 2026-09-11
Quick verdict
Creality Clog Poke is a maintenance accessory, not a general 3D printer upgrade, so fit matters more than the Creality name in the title. The tracked price sits at £9.99-£10.09, which only makes sense if the 1.5mm x 210mm cleaning needle suits your 1.75mm filament nozzle and hotend setup. Check the AliExpress listing for the exact option, then compare it with a generic nozzle-cleaning needle or wire set before you buy.
Available options and prices
Creality Clog Poke 3D Printer Nozzle Cleaning Kit for 1.75mm Filament Nozzles Φ1.5mm L210mm Needle Clean Hotend 3d Printer Part is listed with 2 options from £10.49-£10.89. The visible options include Creality Clog Poke, so use the table to compare the option that matches the exact size, colour, format or specification you want. Always confirm the final checkout price, delivery charge and stock status on the retailer page.
Key product details
These are the retailer details worth checking first for Creality Clog Poke 3D Printer Nozzle Cleaning Kit for 1.75mm Filament Nozzles Φ1.5mm L210mm Needle Clean Hotend 3d Printer Part: Brand: Creality; Type: 3D printer filament; Options tracked: Creality Clog Poke; Price range: £10.49-£10.89. Treat them as a quick fact sheet, then use the retailer page to verify any installation, warranty, delivery or model-number details before buying.
| Brand | Creality |
|---|---|
| Type | 3D printer filament |
| Options tracked | Creality Clog Poke |
| Price range | £10.49-£10.89 |
| Owner rating signal | Not enough owner-review data yet |
| Last checked | 2026-09-11 |
What the AliExpress listing shows
The AliExpress listing names the item as a Creality Clog Poke 3D Printer Nozzle Cleaning Kit for 1.75mm Filament Nozzles, with a stated Φ1.5mm and L210mm needle. Two tracked options are currently in stock, but the visible listing evidence is still thin, so the bundle or variant differences need checking on the product page. Because there is not enough owner-review data to lean on, the title and specs are more useful than any headline score.
What the wider context adds
Creality’s own maintenance guidance covers nozzle cleaning and unclogging as normal upkeep, and Creality also sells nozzle-kit products through its store. That supports the idea of a nozzle-cleaning tool like this Creality Clog Poke, but it does not verify this exact AliExpress item. For that reason, it is best treated as a shortlist comparison entry for a £9.99-£10.09 accessory, not proof of official Creality supply or endorsement.
Main trade-offs before you buy
The main trade-off is a branded-looking niche tool versus a cheaper generic nozzle-cleaning needle or wire set. At £9.99-£10.09, the Creality Clog Poke has to earn its place on fit and convenience, especially once AliExpress delivery cost and delivery time are added to the basket. If the checkout total climbs or the option details stay unclear, a simpler generic cleaner may be the better buy.
Price and value benchmark
At £9.99-£10.09, this listing sits above the benchmark median of £4.51, so it is not a low-stakes impulse buy. There are 2 tracked variants here, which is more than the typical peer listing, but that only helps if the option you choose genuinely changes the bundle or fit. Value depends on usefulness and compatibility, not on the starting price alone.
Specs versus nearby alternatives
The stated 1.5mm diameter and 210mm length matter because they point to a specific maintenance use for 1.75mm filament hotends, not broad compatibility. Compared with a generic nozzle-cleaning needle or wire set, this option is only worth extra attention if your nozzle access, hotend layout and cleaning routine actually suit that size. It is also worth confirming whether the AliExpress item is a third-party listing using the Creality name or an official Creality accessory.
How to read the review evidence
Public review evidence for this exact AliExpress listing is thin, and there is not enough owner-review volume to treat any displayed rating as reliable buying proof. For a niche £9.99-£10.09 accessory like Creality Clog Poke, weak review details matters less than confirming the 1.5mm x 210mm spec and the final delivered price. In other words, don’t overread the rating when the listing itself gives you more useful clues.
Who it suits
This suits 3D printer owners who already know their nozzle and hotend setup and want a dedicated maintenance tool for 1.75mm filament nozzles. It is most relevant if you are comparing Creality-branded or Creality-style maintenance accessories and need the 1.5mm x 210mm format for a specific printer. If you keep spare nozzles or already maintain your machine regularly, it may be a neat add-on rather than a major upgrade.
Who should avoid it
Avoid this if you are unsure about compatibility, because the listing is too specific to buy safely on the Creality name alone. Shoppers who just want the cheapest workable cleaning tool may be better served by a generic nozzle-cleaning needle or wire set, especially if the final delivered cost pushes the total beyond the £9.99-£10.09 headline. It is also not the right pick if you need proof of official Creality manufacture before you order.
Comfort and practical use
Creality Clog Poke is a simple maintenance accessory, so the practical checks are straightforward: confirm the 1.75mm filament nozzle fit, the 1.5mm x 210mm needle size, and the hotend layout on your printer before ordering. Creality’s general nozzle-cleaning guidance supports using a tool like this for routine upkeep, but you should still verify the use instructions on the AliExpress page, especially if you plan to work on a heated nozzle. For a £9.99-£10.09 accessory, the useful question is whether the format matches your printer rather than whether it promises more than basic cleaning.
Value verdict
The price is reasonable only if the Creality Clog Poke fits your exact 1.75mm nozzle and hotend setup and the delivery charge stays sensible. With stock showing as available and the list price at £9.99-£10.09, it makes most sense for shoppers who want a specific maintenance tool rather than the cheapest generic alternative. If shipping is high or the option differences are unclear, wait and compare it with simpler nozzle-cleaning tools first.
Good alternatives to compare
The closest alternatives to compare with Creality Clog Poke 3D Printer Nozzle Cleaning Kit for 1.75mm Filament Nozzles Φ1.5mm L210mm Needle Clean Hotend 3d Printer Part include Creality Official Ender 3 V3 SE/KE Filament Runout Sensor Kit, Detection Module Detector with LED Light for V3 KE/V3 SE 3D Print, Creality K2 Plus Filament Cutter 5pcs Set High Durability Quick Cut 3d Printer Parts For K2 Plus Fast Replacement, Creality K2/K2 Pro/K2 Plus Extruder Front Cover, Original Extruder Support 1.75mm Filament Extruder Smooth and Precise Feeding. Use these cards to check whether a nearby model gives you a better price, a more suitable specification or a clearer match for your space and budget.
Available 
Creality K2 Plus Filament Cutter 5pcs Set High Durability Quick Cut 3d Printer Parts For K2 Plus Fast Replacement
from £11.69.
£11.69
Options tracked: Filament Cutter-5Pcs
Available 
Creality K2/K2 Pro/K2 Plus Extruder Front Cover, Original Extruder Support 1.75mm Filament Extruder Smooth and Precise Feeding
from £14.49.
£14.49
Options tracked: Extruder Front Cover
Retailer details used
Last checked 2026-09-11. The source list below is included to help you check the details behind the comparison. Always confirm the latest price, delivery cost, stock status and product details with the retailer before buying.
More products to compare
These related guides and reviews can help you compare nearby options before buying.
Questions about this product
Is this an official Creality accessory or a third-party listing using the Creality name?
The listing uses the Creality name, but the available evidence does not prove official manufacture or endorsement. Treat the brand as a clue, then check the seller identity, bundle details and product wording on AliExpress before ordering.
What nozzle and hotend types is the 1.5mm x 210mm cleaning needle actually compatible with?
The title points to 1.75mm filament nozzles and a 1.5mm, 210mm cleaning needle. That suggests a specific hotend maintenance use, but you should still verify your printer model and nozzle access on the AliExpress page because the exact compatibility is not fully explained there.
Is this better value than a generic nozzle-cleaning needle or wire set?
Only if the Creality Clog Poke’s dimensions and format suit your printer better than a cheaper generic tool. At £9.99-£10.09, it needs to justify itself on fit and convenience, especially once delivery cost and shipping time are added at checkout.
Can I rely on the review score if owner-review volume is thin?
No. The exact listing does not appear to have meaningful owner-review volume, so the headline score is a weak guide. For this product, compatibility, stock and delivered price are more useful than trying to infer quality from a sparse rating.
Are the two tracked options meaningfully different?
They may be, but the current listing evidence does not clearly explain the difference. Before buying, compare the option name, bundle contents and final checkout price on the AliExpress page so you know whether you are getting anything extra for the higher option.