Available 
TPU 3D Printer Flexible Filament 250g 1.75mm Length 80M
from £7.44-£7.99.
£7.44-£7.99
Options tracked: Blue, Green
NONE 3D printer filament
Chopped Basalt Fiber Strand Filament 3mm/6mm/9mm/12mm/15mm/18mm Length for Concrete Asphalt Highway Brake Material 1kg review
A cautious AliExpress review for a chopped basalt fibre listing that looks more industrial than consumer filament, with price, option and spec checks front and centre.
ReviewsShop may earn a commission if you buy through links on this site.
Last verified: 2026-07-08
Quick verdict
This AliExpress listing looks more like chopped basalt fibre for reinforcement or composite use than a normal consumer 3D-printing filament spool. The £5.09-£8.13 price is not high in absolute terms, but value depends on whether the 1kg or 18mm 1KG option matches your job and whether the seller can back up the specification. With no meaningful visible owner-review section, treat it as a spec-check buy rather than a confidence-heavy one.
Available options and prices
Chopped Basalt Fiber Strand Filament 3mm/6mm/9mm/12mm/15mm/18mm Length for Concrete Asphalt Highway Brake Material 1kg is listed with 1 option from £8.04. The visible options include 18mm 1KG, so use the table to compare the option that matches the exact size, colour, format or specification you want. Always confirm the final checkout price, delivery charge and stock status on the retailer page.
| Option | Key spec | Price | Stock | Last checked | Link |
|---|---|---|---|---|---|
| 18mm 1KG | Check retailer | £8 | In stock | 2026-07-08 | View |
Key product details
These are the retailer details worth checking first for Chopped Basalt Fiber Strand Filament 3mm/6mm/9mm/12mm/15mm/18mm Length for Concrete Asphalt Highway Brake Material 1kg: Brand: NONE; Type: 3D printer filament; Options tracked: 18mm 1KG; Price range: £8.04. Treat them as a quick fact sheet, then use the retailer page to verify any installation, warranty, delivery or model-number details before buying.
| Brand | NONE |
|---|---|
| Type | 3D printer filament |
| Options tracked | 18mm 1KG |
| Price range | £8.04 |
| Owner rating signal | Not enough owner-review data yet |
| Last checked | 2026-07-08 |
What the product page shows
The title points to chopped basalt fibre with uses in concrete, asphalt, highway and brake material, which fits an industrial-style product context. The tracked brand is NONE, and the page currently shows two options: 1kg and 18mm 1KG. The tracked price range is £5.09-£8.13, so check the latest retailer price, delivery cost, delivery time and stock status before deciding.
What the wider context suggests
Public supplier pages describe chopped basalt fibre as reinforcement material for concrete, asphalt, brake materials and related composites, and they commonly show short lengths in the 3 mm to 18 mm range. That makes the AliExpress title plausible as an industrial-style fibre listing, but it does not prove this exact item’s batch quality or suitability. For this page, the safest reading is that the product family makes sense, while the exact listing still needs buyer verification because the visible owner-review section is not meaningful.
Main buyer trade-offs
The big trade-off here is price versus certainty. A £5.09 headline price only helps if the fibre length, any treatment, and the actual net weight are right for your application, because the brand is NONE and the visible review detail is thin. Delivery cost and delivery time matter more than usual on a low-cost item like this: if shipping adds several pounds, a £5.09 item can quickly stop being good value, and a long UK delivery estimate can make it awkward if you need material for a time-sensitive job.
Price and value benchmark
At £5.09, this sits above the comparable-product median of £3.39, so it is not an obvious bargain against nearby tracked alternatives. It also has two tracked variants versus a median of one, which suggests a simple choice rather than a broad range of specialist options. That makes the listing most interesting for shoppers who already know they need chopped basalt fibre and are comparing fit, not chasing the lowest sticker price.
How it compares with alternatives
Compare the 1kg and 18mm 1KG options carefully, because the right choice depends on whether the seller is using the label for bundle size, cut length or a simple variant name rather than a true material difference. If you need standard consumer filament, this listing is a poor match and a clearer alternative such as a named PLA or PETG spool is the safer route. For buyers who do need chopped fibre, compare it with better-specified basalt-fibre listings from specialist suppliers, where the public product pages more clearly show length ranges like 3 mm to 18 mm and give more use-context than this AliExpress page.
How to read the review evidence
There is no meaningful customer-review section visible for this exact item in the available AliExpress page evidence, and the exact star rating and review count were not exposed. That means retailer wording should not be treated as independent proof of quality or suitability for this £5.09-£8.13 product. For a raw-material style listing, weak review visibility is a real limitation, so shoppers should lean more heavily on specification clarity and checkout details.
Who it suits
This listing suits shoppers who are specifically looking for chopped basalt fibre for reinforcement or composite-style use and are comfortable checking the exact specification before buying. It also suits buyers who can work from the product title and the common 3mm/6mm/9mm/12mm/15mm/18mm basalt-fibre length range, rather than needing a well-known brand. If the checkout details confirm the fit, the £5.09 starting price could be reasonable for a targeted industrial-style purchase.
Who should avoid it
Avoid this if you want a standard consumer 3D-printer filament, because the title and wider product context point more toward chopped basalt fibre than ordinary spool filament. It is also a poor fit if you need strong review reassurance, full technical specs up front, or a familiar brand to lean on, especially with the tracked brand shown as NONE, the price sitting at £5.09-£8.13, and no meaningful visible customer-review section. Shoppers comparing it against clearer basalt-fibre listings from specialist suppliers will likely prefer those if they want a product page that says more than this one does.
What to verify before checkout
Before paying, confirm the final price in pounds, the UK delivery cost, the delivery time and whether the item is actually in stock. Recheck that the option you choose is the one you need, because the current range is only 1kg and 18mm 1KG and the page does not show the fuller technical detail many buyers would expect. If the seller cannot clearly confirm dimensions, treatment or intended use, that is a warning sign for this £5.09-£8.13 listing.
Value check
The value case here depends on application fit, not price alone. At £5.09-£8.13, the listing can make sense for a buyer who needs chopped basalt fibre and can verify the spec, but the above-median price, blank brand field and weak review visibility reduce confidence. If delivery charges are low and the listing matches your intended use, it may be useful; if not, better-specified alternatives are likely safer.
Good alternatives to compare
The closest alternatives to compare with Chopped Basalt Fiber Strand Filament 3mm/6mm/9mm/12mm/15mm/18mm Length for Concrete Asphalt Highway Brake Material 1kg include TPU 3D Printer Flexible Filament 250g 1.75mm Length 80M, 32 Colors 3D Pen Filament 1.75mm PLA, Each Color 10Feet(3m), Total 320 Feet (96m) 3D Pen Filament Refills, Random Color, 3D Printing Pen DIY Three-dimensional Painting Children Toys Fun Camouflage With LCD Screen Compatible PLA Filament Toys Gift. Use these cards to check whether a nearby model gives you a better price, a more suitable specification or a clearer match for your space and budget.
Available 
32 Colors 3D Pen Filament 1.75mm PLA, Each Color 10Feet(3m), Total 320 Feet (96m) 3D Pen Filament Refills, Random Color
from £3.09-£3.16.
£3.09-£3.16
Options tracked: 3m 10 Colors
Available 
3D Printing Pen DIY Three-dimensional Painting Children Toys Fun Camouflage With LCD Screen Compatible PLA Filament Toys Gift
from £2.13-£5.99.
£2.13-£5.99
Retailer details used
Last checked 2026-07-08. The source list below is included to help you check the details behind the comparison. Always confirm the latest price, delivery cost, stock status and product details with the retailer before buying.
More products to compare
These related guides and reviews can help you compare nearby options before buying.
Questions about this product
Is this actually chopped basalt fibre rather than standard 3D printer filament?
Yes, the title and product context point much more strongly to chopped basalt fibre for reinforcement or composite use than to ordinary consumer 3D-printing filament. If you wanted a spool for printing, double-check the listing carefully before buying.
What should UK shoppers verify before buying this listing?
Check the final checkout price, UK delivery cost, delivery time, stock status, and the exact option name you are selecting. Also verify the key technical details that are not clearly shown here, such as diameter, surface treatment and moisture content, if they matter for your project.
Does the 1kg or 18mm 1KG option better fit the intended job?
That depends on the application and the seller’s exact specification. The current page only shows two options, so compare them on net weight, length, and any technical detail the seller provides before deciding which is the better fit.
How does the price compare with nearby AliExpress alternatives?
At £5.09, it sits above the tracked comparable median of £3.39, so it is not a bargain-basement listing. The best comparison is whether a nearby basalt-fibre or reinforcement listing gives clearer specs for the same or lower total checkout cost.
Why does the lack of visible reviews matter here?
Because there is no meaningful customer-review section visible for this exact item, you cannot lean on buyer feedback to confirm performance or consistency. That makes the product a spec-first decision, especially for a material that may be miscategorised as 3D printer filament.